Skip to content
WARNING: Vaping products contain nicotine, a highly addictive chemical. Health Canada
WARNING: Vaping products contain nicotine, a highly addictive chemical. Health Canada

Country

ADULTS ONLY 19+

You must be of legal age to enter.

Vaping and DIY Coil Building: Crafting Your Perfect Vaping Experience

Vaping and DIY Coil Building: Crafting Your Perfect Vaping Experience

Vaping enthusiasts often seek more customization and control over their vaping experience, and one way to achieve this is by building your own coils. DIY coil building allows you to tailor your vapor production, flavor, and throat hit to your liking. In this blog, we'll provide a step-by-step guide for vapers interested in venturing into the world of coil building while emphasizing the benefits and essential safety precautions.

Step 1: Gather Your Materials

Before you begin, ensure you have the necessary materials:

  • Resistance wire (Kanthal, Nichrome, or Stainless Steel)
  • Screwdriver or coil jig
  • Wire cutters
  • Cotton wicking material
  • Ohm meter
  • Tweezers
  • Coil building kit (optional but convenient)

Step 2: Calculate Your Resistance

Determine the resistance you want for your coil, as it affects the wattage, vapor production, and throat hit. You can use online calculators to help you find the right wire gauge and number of wraps to achieve your desired resistance.

Step 3: Build Your Coil

  • Wrap the wire around the screwdriver or coil jig according to your calculations. Ensure the wraps are tight and evenly spaced.
  • Trim any excess wire.
  • Install your coil into the atomizer deck, securing it in place.
  • Check the resistance using an ohm meter to ensure it matches your calculations.

Step 4: Dry Burn and Adjust

  • Dry burn the coil at a low wattage to eliminate any residue or hotspots.
  • Use ceramic tweezers to gently strum and pinch the coil until it heats evenly from the center outwards.

Step 5: Wicking

  • Thread a piece of cotton through the coil, ensuring it's snug but not too tight.
  • Trim the excess cotton on each side, leaving enough for effective wicking.

Step 6: Prime and Test

Dampen the wick with e-liquid to saturate it and prevent dry hits. Reassemble your atomizer, fill the tank, and test your coil at a low wattage before gradually increasing it to your desired vaping level.

Benefits of DIY Coil Building

  1. Customization: You have full control over the coil's specifications and performance.
  2. Cost-Efficiency: Building your coils can be more economical in the long run.
  3. Enhanced Flavor: Fine-tuning your coil can significantly improve flavor.

Safety Precautions

  • Be aware of Ohm's Law and never build coils beyond the safe limits of your battery.
  • Always use high-quality materials and tools.
  • Ensure your coil's resistance matches your mod's capabilities.
  • Regularly check and maintain your coils for optimal performance and safety.

By following this guide and observing safety precautions, you can explore the world of DIY coil building and elevate your vaping experience to new heights. Happy vaping!

Previous article E-Juice Spotlight: KOIL KILLAZ - ROUNDHOUSE - The Best Blend of the Week